Small solar system components for a Nigerian apartment

Small Solar System for a Nigerian Apartment: Components, Sizing and Costs

A small solar system can keep essential devices running during a blackout, but the right setup depends on what you want to power, how many hours you need it, and the equipment you can safely install. A panel, battery and inverter are not a plug-and-play kit: their voltage, current, charging limits and protection devices must match.

Important price update: the old version of this article promised a complete system for under ₦150,000 using April 2026 estimates. Those figures are no longer a reliable current quotation. Current Nigerian listings show a 100W panel around ₦25,000–₦35,000, while a listed 1kWh 12V lithium battery is about ₦213,000 and a 1kVA inverter median is about ₦155,000. Those three items alone total roughly ₦393,000–₦403,000 before the charge controller, protection, mounting, cables, labour and delivery. This is an illustrative comparison, not a complete system quote. Panel price survey · Battery listings · Inverter market survey.

What can a small apartment solar system run?

A properly sized small system may support low-power essentials such as LED lights, phones, a Wi-Fi router, a laptop and a modest fan. Whether it can run them together, and for how long, depends on each device’s actual wattage, daily use, inverter efficiency, battery chemistry and usable battery capacity.

Do not assume that a system described as “1kVA” can run every appliance up to 1,000 watts continuously. Check the inverter’s continuous watt rating, surge rating, battery voltage and the manufacturer’s limits. Air conditioners, electric kettles, pressing irons, cookers and many refrigerators need a much larger system and careful starting-current assessment.

Start with your appliance list, not a package price

Write down each appliance, its rated watts (W), and the number of hours you expect to use it daily. Multiply watts by hours to estimate daily energy in watt-hours (Wh):

Daily energy (Wh) = appliance watts × hours used per day.

Example loadIllustrative powerUse per dayEnergy per day
Two LED bulbs9W each5 hours90Wh
Wi-Fi router12W8 hours96Wh
Laptop60W4 hours240Wh
Small fan25W5 hours125Wh
Illustrative total551Wh

These are example values, not measurements of your appliances. Check the label or power adapter, and remember that a laptop charger marked 65W does not necessarily draw 65W continuously. Add the energy for every device you expect to use. Also identify which loads may operate at the same time; that determines the inverter’s required output.

Choose the battery and inverter to match the load

Battery capacity is not the same as usable energy

A 12V, 100Ah battery has a nominal energy rating of about 1,200Wh (12V × 100Ah). That does not mean you should plan to use all 1,200Wh. The usable amount depends on battery chemistry, the manufacturer’s permitted depth of discharge, discharge rate, temperature, age and inverter losses. Lead-acid batteries generally need a more conservative usable-capacity allowance than many LiFePO4 batteries. Follow the battery manufacturer’s limits rather than applying one percentage to every model.

Check the battery’s continuous discharge-current rating as well as its capacity. A battery can have enough stored energy on paper but still be unsuitable for an inverter if it cannot safely deliver the required current.

Select an inverter for both running and starting loads

Compare the total simultaneous load with the inverter’s continuous output rating. Motors and compressors can draw a higher starting current, so check the appliance’s starting requirement and the inverter’s surge rating. Confirm whether the inverter is pure sine wave and whether its output, frequency and neutral/earthing arrangement are suitable for the equipment and local installation.

Never select an inverter only because the front label says 800W, 1kVA or 1.5kVA. Read the exact model’s manual and datasheet. Apparent power (VA) and real power (W) are not interchangeable.

Choose a solar panel and charge controller that are compatible

A panel’s wattage is its rated output under specified test conditions, not a promise that it will produce that amount throughout the day. Actual energy varies with sunlight, cloud, panel temperature, orientation, shading, dirt, wiring and controller losses. A 100W panel should not automatically be treated as producing 500Wh every day.

Check the panel’s open-circuit voltage (Voc), maximum-power voltage (Vmp), short-circuit current (Isc) and maximum-power current (Imp). The charge controller must accept the panel’s voltage and current, suit the battery’s nominal voltage and support the battery manufacturer’s charging profile. A controller’s “20A” label alone does not establish that it is compatible with every panel and battery combination.

PWM and MPPT controllers work differently. A PWM controller is often less expensive, while an MPPT controller can harvest more energy in suitable configurations. Do not assume MPPT always adds a fixed percentage of output: the benefit depends on panel voltage, battery voltage, temperature and operating conditions. Morningstar explains the importance of accounting for system losses, battery charging efficiency and the least-sunny period when sizing an off-grid system: basic system-sizing concepts.

What does a small solar system cost in Nigeria?

There is no dependable universal “under ₦150,000” package price. Prices vary by brand, capacity, battery chemistry, warranty, stock, seller, location and whether installation is included. The following are recent published market references checked on 19 November 2026; they are not quotations from a single supplier and should not be added together as if they were a compatible kit.

ItemPublished market referenceWhat to confirm
100W solar panel₦25,000–₦35,000 (October 2026 survey)Brand, new/used condition, Voc, Vmp, Isc, warranty and actual stock
12V 1kWh lithium battery₦213,000 listing for one Cworth model (18 November 2026)Exact model, BMS limits, continuous current, warranty and inverter compatibility
1kVA inverter₦155,000 median in a November 2026 market surveyExact watt output, waveform, battery voltage, surge rating and whether hybrid
Controller, protection and installationNo comparable current quote used hereGet itemised quotations for controller, DC/AC protection, cables, mounting, labour and delivery

Sources: Solepower’s October 2026 panel survey, Betapawa’s battery listings updated 18 November 2026 and InfraSol’s November 2026 inverter survey. Marketplace prices are asking prices; confirm availability, warranty and final cost with the seller before paying.

Installation: what a qualified technician should check

This is not a beginner wiring tutorial. Batteries can deliver extremely high fault current, solar panels can remain live in daylight, and incorrect DC connections can cause burns, fire, equipment damage or electric shock. Have a qualified solar installer design and make the electrical connections. Do not copy a generic fuse size, cable size or connection diagram from an article.

  • System voltage: confirm that the inverter, battery bank and controller are designed for the same nominal voltage.
  • Battery protection: select a correctly rated DC fuse or breaker and isolator for the specific inverter, battery, cable and manufacturer’s instructions.
  • Cable sizing: calculate cable cross-section using current, cable length, installation conditions and allowable voltage drop. Do not choose cable by appearance.
  • PV protection: confirm the need and rating of PV isolators, string fuses and surge protection for the actual array design.
  • Earthing and AC protection: verify protective earthing, bonding, residual-current protection and the inverter’s neutral arrangement under applicable local requirements.
  • Battery settings: set absorption, float and any equalisation settings to the battery manufacturer’s specifications. Do not equalise a lithium battery unless its manufacturer explicitly permits it.
  • Location: install batteries and inverter in a dry, ventilated, secure place, away from heat, water, children and combustible materials. Follow the equipment’s clearance requirements.
  • Commissioning: ask the installer to test polarity, torque, protection devices, charging voltage, inverter output and shutdown/isolation procedures, then provide the settings and equipment manuals.

For an example of why fuse and cable sizes must be model-specific, Victron’s inverter installation manual publishes different battery cable and fuse requirements for different inverter voltages and ratings: Victron inverter installation guidance. Do not copy its table for another brand; use the manual for the equipment actually installed.

Where can you place a panel in a rented apartment?

Possible locations include a roof, balcony or a properly engineered ground/stand mount, but the best position depends on access to sunlight, shading, wind exposure, security and the building structure. Ask the landlord or property manager before fixing brackets to a roof, wall or balcony. Do not rely on cable ties or an improvised railing mount to secure a panel. A panel that falls can injure someone and damage property.

Panel direction and tilt should be selected for the location and mounting arrangement, not from a single rule that applies to every Nigerian city and every roof. Avoid shade from parapets, water tanks, trees and nearby buildings, and ask the installer to assess the structure and wind loading.

How to estimate backup time

First estimate the energy your loads use. Then compare that figure with the battery’s usable energy after applying the manufacturer’s depth-of-discharge limit and allowing for inverter and wiring losses. For a rough planning check:

Estimated runtime (hours) ≈ usable battery energy (Wh) ÷ average AC load (W).

This is only an estimate. Inverter idle consumption, load changes, battery age, temperature, discharge rate and surge demand affect real runtime. A technician should check the design against the exact battery and inverter datasheets. Solar generation during the day may extend runtime, but do not count on full rated panel output in every weather condition.

Common mistakes to avoid

  • Buying a panel, controller, battery and inverter separately without checking electrical compatibility.
  • Assuming a 100W panel will deliver a fixed daily number of watt-hours.
  • Using a car starter battery for repeated deep cycling when the battery manufacturer does not approve that use.
  • Choosing a fuse or cable size from a generic online recommendation.
  • Ignoring the inverter’s surge rating when planning to run a fridge, pump or motor.
  • Mounting a panel loosely on a balcony or roof without proper brackets and structural assessment.
  • Believing an advertised battery Ah figure tells the whole story without checking voltage, chemistry, usable energy and discharge-current limits.
  • Paying a deposit based only on a social-media advert without confirming the seller, model, warranty and return terms.

When should you choose a solar generator instead?

If you rent and cannot mount a panel or install fixed wiring, a portable power station may be easier to move. Compare its usable battery capacity, continuous AC output, surge output, solar input limits, charging time, warranty and replacement-battery policy. A portable unit is not automatically cheaper per usable watt-hour, and its solar input must still match the panel’s voltage and current limits.

For a broader explanation of the differences, read our solar generator vs solar inverter vs solar system comparison. If you need a larger home installation, see our solar inverter setup guide for a Nigerian two-bedroom flat and solar inverter price guide.

Frequently asked questions

Can I build a complete apartment solar system for under ₦150,000?

Do not rely on the old ₦150,000 estimate in this article. Recent published Nigerian listings put a 100W panel at about ₦25,000–₦35,000, a listed 1kWh 12V lithium battery at ₦213,000, and the median 1kVA inverter listing at about ₦155,000. Those three components already exceed ₦150,000 before the controller, protection, wiring, mounting and installation. A much smaller solar lighting or charging kit may cost less, but it is not equivalent to the inverter-and-battery system described here.

Can a 100W solar panel charge a 100Ah battery?

It may charge a compatible 12V battery, but charging time depends on the battery’s state of charge, panel output, sunlight, controller, losses and the battery’s permitted charge current. A 100W panel is a small array for a 100Ah battery and may not replace daily consumption quickly, especially during cloudy or rainy periods. Have the array and controller sized for your actual daily energy use.

Can I connect the inverter directly to the charge controller?

Do not connect an inverter to a controller’s load terminals unless both manufacturers explicitly specify that use and the terminal is rated for the inverter’s current. Many small controller load outputs are intended for limited DC loads. The inverter’s battery connection and protection must follow the inverter manufacturer’s wiring diagram and be installed by a qualified technician.

Is a PWM or MPPT controller better?

It depends on the panel voltage, battery voltage, system size and budget. MPPT can be advantageous when the panel array voltage is higher than the battery charging voltage, but the correct controller must still meet the panel’s voltage/current limits and the battery’s charging requirements. Compare the exact models rather than choosing by label alone.

Can I install the system myself?

This guide is for planning and shopping, not DIY live wiring. DC battery faults can produce very high current, and solar panels generate electricity whenever illuminated. Use a qualified installer for system design, protection, wiring, earthing and commissioning.

Sources and further reading

Editorial note: Prices and product availability can change quickly. This guide explains how to plan and compare a small system; it is not a substitute for a site survey, equipment datasheets or a qualified electrical installation. Always verify current stock, warranty and compatibility before purchasing.

Scroll to Top